Control Computer Configuration

The control computer is used to monitor, control, and adjust the Gentner Audio system. This requires a Windows 98 computer connected to the Gentner devise through a RS-232 cable. The following procedures assume a working Win 98 machine with a network connection to the Internet. The software required for this installation can be found at the Gentner site www.gentner.com/t4papt.html.

1. Connect the RS-232 cable, provided in the Gentner package, between the RS-232 port on the Gentner and Com 1 of the computer.

2. Connect to the Gentner site at www.gentner.com/t4papt.html.

3. Download and install the AP software to the Control machine