Configuration for Unbalanced connection to Speaker System
If you are using a Stereo or Surround Sound Receiver/Amplifier you will need to connect the MM100 Matchmaker in line to convert the balanced Gentner output to an unbalanced signal for the receiver.
Connect an "XLR Male to Gentner Phoenix" cable to the "Balanced Bridging Line inputs L" connector, and the other end to Gentner Output 1.
Connect an "RCA Male to RCA Male" cable to the "IHF Sends L" connector, and the other end to your amplifier or amplified speaker's "Line In" connector. You may want to use a RCA Female to two RCA Male Y-cable if you have a stereo amplifier (the Access Grid is monaural for now).
