AccessGrid.org

How to Configure the ClearOne XAP800 for an Access Grid Node

|

This document, by Mike Miller of NCSA, was originally published on the AG Documentation Project. It is intended to provide step-by-step instructions for the initial configuration of your ClearOne XAP800 echo cancellation device for use in an Access Grid (AG) node. Throughout this document, it is assumed that you are using the ClearOne XAP800. However, savvy readers will most likely be able to set up other EC devices using these instructions as a general guide.

AttachmentSize
XAP800Setup.pdf1.05 MB

login or register to post comments